Sw&Disp Setup Screen - Panasonic AG-HMC80P Operating Instructions Manual

SW&DISP SETUP screen
Display
Item
mode
HANDLE CAMERA Sets the speed allocated to the handle zoom switch.
ZOOM PHOTO L/OFF/H:
L/M/H:
L/OFF/M:
IRIS DIAL CAMERA Sets the rotation direction and the aperture control of the IRIS dial. (In MANUAL
PHOTO IRIS mode)
DOWN OPEN:
UP OPEN:
USER1 SW CAMERA Selects the function assigned to the USER1 button.
PHOTO INH:
DV IN (PUSH)AF:
PB
BACKLIGHT:
SPOTLIGHT:
BLACKFADE:
WHITEFADE:
ATW:
ATW LOCK:
HIGH GAIN:
D.ZOOM:
EVF DTL:
SHOT MARK:
LAST CLIP:
WFM:
USER2 SW CAMERA Assigns a function to the USER2 button.
PHOTO The setting contents are the same as USER1 SW.
DV IN BACKLIGHT
PB
USER3 SW CAMERA Assigns a function to the USER3 button.
PHOTO The setting contents are the same as USER1 SW.
DV IN SHOT MARK
PB
INDICATOR PB Selects whether to display the thumbnail indicator.
(AVCHD mode ON:
only) OFF:
FOCUS CAMERA Assigns a function to the FOCUS ASSIST button.
ASSIST SW PHOTO EXPANDED: Displays the center of the screen in expanded view.
BAR:
BOTH:
RING SW CAMERA Assigns a function to the RING switch.
PHOTO ZOOM: Switch between FOCUS and ZOOM.
IRIS:
Description of settings
1 - (low-speed); 2 - (speed adjustment OFF); 3 - (high-speed)
1 - (low-speed); 2 - (medium-speed); 3 - (high-speed)
1 - (low-speed); 2 - (speed adjustment OFF); 3 - (medium-speed)
The iris opens when the IRIS dial is turned downward.
The iris opens when the IRIS dial is turned upward.
No function assigned.
Switches to auto focus mode when the button is held during
manual focus mode.
Auto iris control for the backlight compensation. (Pages 12, 61)
Switches auto iris control for the spotlight on or off.
Blackfade (Pages 12, 61)
Whitefade (Pages 12, 61)
Switches the ATW function on or off.
Fixes the white balance value when the button is pressed
during ATW. Press again to perform ATW.
The gain mode switches between normal and high with each
press of the button. Gain can be set to up to 34 dB in high gain
mode. This does not work in PHOTO mode. (Pages 6, 55)
Changes the ratio of the DIGITAL ZOOM function. Each press
of the button changes the ratio in the following order: OFF (x1)
→ x2 → x5 → x10 → OFF (x1). (Page 39 of Vol.1)
Emphasizes outlines of images in the viewfinder for easier
focusing when the button is pressed.
Shot mark recording (Pages 49, 85)
Deletes the last recorded clip. (Pages 14, 63)
Displays a waveform (only on the viewfinder during CAMERA
mode).
Displayed
Not displayed
A bar extends to the right as focus is aligned.
Enables both expanded view and focus bar display.
Switch between FOCUS and IRIS.
indicates the factory setting.
107