Polycom Soundpoint IP 331 Configuration Manual

Full-duplex ieee 1329

Hide thumbs Also See for Soundpoint IP 331:

Download this manual See also: Administrator's Manual, User Manual

Polycom Soundpoint IP 331 Configuration guide

This guide is for a Polycom IP phone SoundPoint IP 331, UC Software Version4.0.4.2906

only. Different models and / or software versions may require different settings.

IP address detection and web management

Assuming a DHCP server is active on your network,

– connect a network cable to your phone LAN port

– power up the phone by plugging the power cable (no need to, if you are using a

PoE switch

– wait for your phone to finish the booting process. It should show a date and time on

the upper left (fig.1)

– press "Menu" button, then "2", "2", "1". You should see the assigned IP address, as

in Fig.2 , showing the usage of IP address 192.168.0.173. Let's call it "ip_address"

Cluana

(fig. 1)

(fig. 2)

Page 1 Cluana Polycom Soundpoint IP 331 Configuration guide This guide is for a Polycom IP phone SoundPoint IP 331, UC Software Version4.0.4.2906 only. Different models and / or software versions may require different settings. IP address detection and web management Assuming a DHCP server is active on your network, –...
Page 2: Ip Phone Configuration
– open a web browser to the URL: http://ip_address – enter the default “456” password and press “Submit” button IP phone configuration Let's assume the following: Your PBX company domain is mycompany.com:5058 (chosen when you created your PBX account) Your PBX hostname is myserver.cluana.com:5058 (provided by Cluana) Your IP Phone User ID / Auth ID is...
Page 3 (fig. 3)
Page 4 Settings Audio codec Priority In use Remove all gray codecs from the “In use:” section, and add the L16.16 codec from the “Unused:” section. Reorder the “In use:” codecs so that L16.16 is first, G.711A is second (G.711Mu for USA and Japan), G.729AB is third.
Page 5 (fig. 5) Preferences Date & Time Set your preferred display format, time zone, time server, resync period and daylight savings parameters. A couple of examples are provided for Italy (Fig 6) and UK (Fig 7) (fig. 6)
Page 6 (fig. 7)