Safety Instructions - Dometic RMDX21 Installation Manual

RMDX21, RMDX25
2

Safety instructions

The manufacturer accepts no liability for damage in the following cases:
Faulty assembly or connection
Damage to the product resulting from mechanical influences and excess
voltage
Alterations to the product without express permission from the manu-
facturer
Use for purposes other than those described in the operating manual
!
WARNING!
Never open the absorber unit. It is under high pressure and can
cause injury if it is opened.
Ensure clean and residue-free handling if silicon sealant or
similar is used. There is a risk of fire if silicone filaments come
into contact with hot parts or naked flames.
Do not operate the refrigerator if it is visibly damaged.
If the AC power cable for this refrigerator is damaged, it must be
replaced by the manufacturer, customer service or a similarly
qualified person in order to prevent safety hazards.
Never use a naked flame to check the refrigerator for leaks.
This refrigerator may only be repaired by qualified personnel.
Inadequate repairs may cause serious hazards.
Only use universal LPG gas.
Only operate the refrigerator at the pressure shown on the
type plate. Only use pressure controllers with a fixed setting
which comply with national regulations.
Dismantle all refrigerator doors for the disposal of the old
refrigerator and leave the shelves in the refrigerator to prevent
accidental enclosure and suffocation.
!
CAUTION!
Danger of crushing! Do not put your fingers into the hinge.
Before starting the device, ensure that the power supply line
and the plug are dry.
EN
Safety instructions
19