Installing The Outer Door - Blomberg DW 14110 NBL00 Service Manual

Built - under dishwasher
Hide thumbs Also See for DW 14110 NBL00:
Table of Contents

Advertisement

5.19.

Installing The Outer Door

Lock the toe kick brackets as shown with the plastic tab in the
figure C by pushing the plastic tab on the dishwasher into the teeth
of the bracket (C).
3. Now attach the toe kick to the bracket with the two (Ø 3/16" x
1/4" - Ø 4mm x 6mm) screws and the caps provided as follows.
If the enclosure height is below 331/16" (840mm) use only "o"
labelled toe kick (toe kick without slots). Installation should be done
following the steps illustrated in the Figures A, B and C
respectively.
1. Bend tabs on toe kick (o) inwards (A).
2. Secure toe kick to brackets with screws (t) as shown in the
supply bags (B).
3. Attach caps (s) as shown in the supply bags (C).
If the enclosure height is above 331/16" (840mm) use "o" and "p"
labelled toe kicks together. Make sure the slotted toe kick "p" is on
the outside so you can adjust height of the toe kick. Installation
should be done following the steps illustrated in the figures A, B
and C respectively.
1. Align the toe kick (o) and (p) (A).
2. Secure toe kicks to brackets with screws (t) after adjusting the
height of the slotted toe kick (p) (B).
3. Attach caps (s) as shown in the supply bags (C).
If the enclosure height is above 341/4" (870mm) use "o" and "r"
labelled toe kicks together. Make sure the slotted toe kick "r" is on
the outside so you can adjust height of the toe kick. Installation
should be done following the steps illustrated in the figures A, B
and C respectively.
1. Align the toe kick (o) and (r) (A).
2. Secure toe kicks to brackets with screws (r) after adjusting the
height of the slotted toe kick (t) (B).
3. Attach caps (s) as shown in the supply bags (C).
Measure the height and width of the enclosure (Figure A)
and the toe kick. Determine how big the wooden door can
be. For example if the height is 337/8" (860mm) and if the
toe kick is 315/16" (100mm) the door can not be taller than
2915/16" (760mm).
1. Prepare the wooden door with the mounting brackets.
Height : Height of the wooden door 28" (711mm)
Width : 23 ¼" to 23 ½" (592mm - 595mm)
Thickness : ¾ " (19mm)
30
BUILT- UNDER DISHWASHER
2011

Advertisement

Table of Contents
loading

Table of Contents