Disconnect the AirMini tubing (F20 only)
1. Disconnect the F20
connector from the AirMini
tubing by gently twisting it
and pulling it apart
Disconnect the AirMini tubing (N20 and AirFitP10 for AirMini only)
1. Disconnect the vent module
from the AirMini tubing by
gently twisting it and pulling
it apart.
Remove the HumidX/HumidX Plus (N20 and AirFit P10 for AirMini
only)
1. Disconnect the mask tube
from the vent module by
gently twisting it and pulling
apart. If you are using
HumidX or HumidX Plus,
remove it from the vent
module.
Note: The HumidX/HumidX Plus
cannot be washed.
10