ResMed AIRMINI User Manual page 21

WARNING
• Beware of electrocution. Do not immerse the machine, power
supply or power cord in water. If liquids are spilled into or onto
the machine, unplug the machine and let the parts dry. Always
unplug the machine before cleaning and make sure that all parts
are dry before plugging it back in.
• Do not use with oxygen. Any sources of oxygen must be located
more than 1 m away from the machine to avoid risk of fire and
burns.
• Do not perform any maintenance tasks while the machine is in
operation.
• Use only AirMini masks and accessories that allow for normal
breathing to avoid asphyxiation.
• The use of accessories other than those specified for the
machine is not recommended. This may result in increased
electromagnetic emissions or decreased immunity of the
machine and result in improper operation.
• The machine should not be used adjacent to or stacked with
other equipment. If adjacent or stacked use is necessary, the
machine should be observed to verify normal operation in the
configuration in which it will be used.
• The F20, N20 and P10 connectors for AirMini are fitted with
vents. The F20 connector for AirMini is also fitted with an AAV.
The AAV and vents have specific safety functions to prevent
carbon dioxide build-up in the mask. The AAV and vents should
be kept clean and not covered or blocked. The connectors
should not be used if the vent or AAV are damaged as they will
not be able to perform their safety functions. The connectors
should be replaced if the valves of the vent or AAV are
damaged, distorted or torn.
• The machine is not intended to be operated by persons
(including children) with reduced physical, sensory or mental
capabilities without adequate supervision by a person
responsible for the patient's safety.
English 19