Caution; Technical Specifications - ResMed AIRMINI User Manual

• The device has not been tested or certified for use in the vicinity
of X-ray, CT or MRI equipment. Do not bring the device within
13 ft (4 m) of X-ray or CT equipment. Never bring the device into
an MR environment.

CAUTION

• Use only ResMed AirMini parts, masks and accessories with the
machine. Non-ResMed AirMini parts may reduce the
effectiveness of the treatment, may result in excess carbon
dioxide rebreathing and/or damage the machine. For
compatibility information, refer to www.resmed.com for more
information.
• Blocking the air tubing and/or air inlet of the machine while in
operation could lead to overheating of the machine.
• Keep the area around the machine dry, clean and clear of
anything (eg, clothes, pillows or bedding) that could block the
air inlet or cover the power supply unit.
• Do not use bleach, chlorine, alcohol, or aromatic-based
solutions, moisturizing or antibacterial soaps or scented oils to
clean the machine or air tubing. These solutions may cause
damage and reduce the life of the products.
• Do not insert any USB cable into the machine or attempt to plug
the power supply unit into a USB device. This may cause
damage to the machine or USB device.

Technical specifications

Units are expressed in cm H
Power supply unit
AC input range:
DC output:
Typical power consumption:
Peak power consumption:
20
O and hPa. 1 cm H
2
100–240V, 50–60Hz
115V, 400Hz (nominal for aircraft use)
24V
6.3W
27W
O is equal to 0.98 hPa.
2
0.83A