Table of Contents
Advertisement
DETAILS OF INPUT AND OUTPUT SIGNALS
Item
Link parameter extended
setting
*5
Second parameter changing
Setting is valid only when Pr. 544 = "0, (100)". When Pr. 544 ≠ "0, (100)", set using RWw2 or RWw10, 12, 14, 16, or
*5
18. (Refer to page 64)
*6
Setting can be made when the link parameter extended setting = "1, 9".
*7
Gain frequencies can be written using Pr. 125 (instruction code H99) and Pr. 126 (instruction code H9A) also.
74
Read /
Code
Write
Number
H0000 to H0009: Parameter description is changed according to the
Read
H007F
instruction code (extended) setting. Refer to the inverter manual for
Write
H00FF
instruction code (extended) settings.
When setting the bias/gain (instruction codes H5E to H61, HDE to
Read
H006C
HE1) parameters
H00: Frequency
*6
H01: Analog value set in parameters
Write
H00EC
H02: Analog value input from the terminal
Description
*7
Advertisement
Table of Contents
