Connecting The Bluewave® System With Your Bluetooth® Device - Sundance Spas Kingston 980 Series Owner's Manual

980™ Series
= Acoustic Settings: Tap to access the audio submenu, page
39.
= Back Button: Tap to go back to the Home Menu.
= Invert Button: Tap to invert the display image.
Artist Name
= Artist/Track: Will display the artist and track information,
Track Name
Volume
11.4 Connecting the BLUEWAVE® System with your Bluetooth®
device
To bridge a connection between the BLUEWAVE 2.0 Wireless Audio
System and your Bluetooth device, follow the steps below.
Note: The BT icon cannot be selected manually. It will appear when a
Bluetooth connection is established with your device. If you experience
a connection problem with your Bluetooth device, make sure that the
Bluetooth antenna is secure and located at the highest point within the
equipment bay.
1. Tap the music icon on the control panel screen then tap the power
button.
2. From your Bluetooth device, make sure that the Bluetooth setting is
ON.
3. Follow the pairing instructions for your Bluetooth device and connect
to the "BLUEWAVE" device that appears on your screen.
4. Once the connection is established, the Bluetooth icon (
screen will be display confirming the connection.
5. If asked for a password, enter the password "0000" and then tap
"Pair" on your device to connect.
6. If the pairing process is successful, your Bluetooth device will show
"Connected" right next to "BLUEWAVE."
Page 38
if it is available. If the information is not available this part
will be blank. If the information provided is too long, the
maximum number of characters will be display follow by
dots ("...").
= Volume: Tap to increase (
volume. The range is from 0 to 15.
) or decrease ( ) the
) on the