Specifications - Audiovox Rampage AXT-1200 Owner's Manual

HIGH PERFORMANCE STEREO AMPLIFIER
This power amplifier has been designed to provide high Quality performance with a
minimum of maintenance. However, it's performance will only be as good as the care
and quality of components with which it is installed. We therefore advise that you
read these instructions very carefully to familiarize yourself with the product and it's
features.
Should you require assistance with the installation or wiring so this unit, please call
our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.

SPECIFICATIONS

Maximum Output Power:
Output Impedance:
Frequency Response:
Channel Separation:
Signal / Noise Ratio:
* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.
1200 Watts
300 Watts RMS x 2
@ 4 Ohms
2 - 8 Ohms (stereo)
10 - 35KHz. +/-1 dB
60 dB
90 dB
Monday-Friday 8:30am - 7:00pm Eastern
Saturday
Input Impedance:
Input Sensitivity:
Filter type:
Filter Crossover:
Supply Voltage:
Fuse Rating:
Dimensions (W X H X D):
-3-
HELP!
1-800-645-4994
9:00am - 5:00pm Eastern
Low-level 10K Ohms
High-level 100 Ohms
Low-level 200 mV - 8 V.
High-level 2V - 10 V.
Selectable High/Full/Low-pass
Crossover @ 12 dB/Octave
LPF 50-250 Hz (variable)
HPF 50-250 Hz (variable)
12 volts, negative ground
40 amps.
295 mm X 54.3 mm X 381mm
11-5/8" X 2-1/8" X 15"