Download Print this page

Specifications - Audiovox XTM-600 Owner's Manual

Audiovox 600 watt mono block mosfet amplifier owner's manual

Advertisement

HIGH PERFORMANCE STEREO AMPLIFIER
This power amplifier has been designed to provide high Quality performance with a
minimum of maintenance. However, it's performance will only be as good as the care
and quality of components with which it is installed. We therefore advise that you
read these instructions very carefully to familiarize yourself with the product and it's
features.
Should you require assistance with the installation or wiring so this unit, please call
our toll-free "HELP" line at 1-800-645-4994 during the days/hours shown.

SPECIFICATIONS

Maximum Output Power:
Output Impedance:
Frequency Response:
Signal / Noise Ratio:
Input Impedance:
Input Sensitivity:
* Due to continuing improvement, Audiovox reserves the right to change features and design without notice.
600 Watts
300 Watts RMS
@ 4 Ohms
2 - 8 Ohms (Mono)
10 - 30KHz. 1 dB
90 dB
Low-Level 10K Ohms
High-Level 100 Ohms
Low-Level 200 mV - 8 V
High-Level 2V - 10 V
Monday-Friday 8:30am - 7:00pm Eastern
Saturday
Filter type:
Filter Crossover:
Bass Boost Level:
Bass Boost Frequency:
Supply Voltage:
Fuse Rating:
Dimensions (W X H X D):
-3-
HELP!
1-800-645-4994
9:00am - 5:00pm Eastern
Selectable Full/Low-pass
Crossover @ 18dB/Octave
LPF 50-250 Hz (variable)
HPF 50-250 Hz (Variable)
0 - 18dB (Variable)
40 - 80Hz (Variable)
12 volts, negative ground
20 amps.
295 mm X 54.3 mm X 230 mm
11-5/8" X 2-1/8" X 9"

Advertisement

loading

This manual is also suitable for:

Rampage axtm-6001286558