Table of Contents
Advertisement
syngo MR D13
Safety information for the system owner
Repairs and modifications
All work, additions, and modifications to the MR system or to
the installation site must be checked by Siemens in advance to
ensure their compatibility with the MR system's functionality.
Modifications or additions to the product must comply with
legal regulations.
The person performing the work must provide a certificate
describing the nature and extent of work performed. This certif-
icate must include information about changes to the nominal
data or work area, along with the date, name of company, and
signature.
Upon request, Siemens Service will provide technical docu-
ments for the MR system (e.g. circuit diagrams, spare parts
lists, descriptions, calibration instructions). However, this
does not constitute authorization for repairs.
Maintenance at regular intervals
In the interest of the safety of patients, operating personnel,
and third parties, it is strongly recommended that only autho-
rized personnel perform the maintenance procedures pre-
scribed by Siemens. System checks should be conducted more
frequently if the system is operated under extreme conditions.
For further information, see ( System Owner Manual: Mainte-
nance Plan).
Please inform Siemens Service if a maintenance contract
does not exist.
A.1
A.1-21
0 . 0
A . 1
A . 1
A . 1
A . 1
A . 1
A . 1
A . 1
0 . 0
0 . 0
Hide quick links:
Advertisement
Table of Contents
