Siemens MAGNETOM Skyra Owner's Manual page 16

Safety instructions
Laser
Video monitoring
Combination of devices
Installation
A.1-4
0 . 0
The laser of the laser light localizer is classified as Class 2M
A . 1
according to IEC 60825-1 (Class II according to US CDRH).
Labeling obligation may be regulated by local laws. The opera-
A . 1
tor is responsible to comply with these laws if a video system is
installed.
A . 1
Any combination to, or modifications of the system must
comply to the requirements of IEC 60601-1:2005 (chapter
16) and must be accepted from Siemens.
Any application of physiological monitoring and sensing devices
to the patient is done under the exclusive direction and respon-
sibility of the system owner.
To generally test the proper operation of peripheral equipment,
a compatibility protocol is available. Manufacturers of periph-
eral equipment should use this Siemens compatibility protocol
to test the functionality of its equipment. ( System Owner
Manual: Compatibility data sheet)
Ensure that the multiple socket of the computers is not placed
A . 1
on the floor.
WARNING: To avoid the risk of electric shock, this equipment
must only be connected to a supply mains with protective
ground.
MAGNETOM Family - Safety Information
A . 1
A . 1
A . 1
A . 1
A . 1
A . 1
A . 1
0 . 0
0 . 0