Dell PowerEdge R330 Owner's Manual page 97

4. If required, connect the cables to the expansion card.
Figure 58. Installing the expansion card in the expansion card riser
1. touch point (2)
3. expansion card riser
Figure 59. Installing the expansion card in the expansion card riser
1. PERC card
3. touch point (2)
5. LED connector on the system board
7. LED connector on the PERC card
Next steps
1. Install the expansion card riser.
2. expansion card riser connector
4. expansion card
2. expansion card connector on the riser
4. expansion card riser
6. LED cable
97