Supported Nic (Gige) Ports (Cisco Video Surveillance) - Cisco CPS-UCS-2RU-K9 User Manual

Chapter 1 Overview
•
•
DIMMs are not field replacable or upgradable in the Cisco Connected Safety and Security UCS series
Note
servers.
Figure 1-12

Supported NIC (GigE) Ports (Cisco Video Surveillance)

The Cisco Connected Safety and Security UCS series servers support the following:
•
•
See the
Note •
•
CPU1—One 8GB DIMM is installed in slot A1
CPU2—One 8GB DIMM is installed in slot E1.
CPUs and DIMM Slots on Motherboard: Cisco Connected Safety and Security UCS
C240
Front of Server
One 1-Gb Ethernet dedicated management port
Two 1-Gb Base-T Ethernet ports
"System Overview" section on page 1-2
The LAN Ethernet posts are referred to as "Eth 0" and "Eth1" in the Cisco Connected Safety and
Security applications, such as Cisco Video Surveillance.
The Cisco Connected Safety and Security UCS series servers do NOT support the NIC redundancy
modes. Only the None option is supported: the Ethernet ports operate independently and do not fail
over if there is a problem.
Cisco CSS UCS Platform Series User Guide, CPS-UCS-1RU-K9 / CPS-UCS-2RU-K9
Supported PSBU Hardware Configurations
(Figure 1-12).
for port locations.
1-21