Back View; Remote Sensor; Getting Started; Remote Sensor Set Up - Oregon Scientific RMS600A User Manual

BACK VIEW (FIG 2)
1. °C / °F: Select temperature unit
2. RESET: Reset unit to default settings
3. EU / UK: Select the nearest radio signal (RMS600
only)
4. Battery compartment
P/N: 086L005521-019 REV1
5/92
1
2
3
4
REMOTE SENSOR (FIG 3)
1
1. LED status indicator
2. Wall mount hole
3. Battery compartment
4. RESET: Reset unit to default settings
5. CHANNEL switch

GETTING STARTED

REMOTE SENSOR SET UP

The remote sensor can collect data from up to 3 channels.
To set up the remote sensor:
1. Slide open the battery door.
2. Slide channel switch to select a channel (1, 2, 3).
Ensure you use a different channel for each sensor.
3
2
4
3
5