Speaker Configuration And "Amp Assign" Settings - Denon AVR-X2400H Owner's Manual

Contents Connections

Speaker configuration and "Amp Assign" settings

This unit has a built-in 7-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing
the "Amp Assign" settings to suit the application, such as 7.1-channel systems, bi-amp connections and 2-channel systems for multi-zone playback.
(v p. 179)
Perform "Amp Assign" settings to suit the number of rooms and speaker configuration to be installed. (v p. 179)
Playback speaker and zone
MAIN ZONE
5.1-channel
7.1-channel (surround back)
7.1-channel (front height)
7.1-channel (top front)
7.1-channel (top middle)
7.1-channel (front Dolby Atmos Enabled speaker)
7.1-channel (surround Dolby Atmos Enabled speaker)
5.1-channel (bi-amp connection for front speaker)
5.1-channel + second pair of front speaker
5.1-channel
0 The sound mode that can be selected varies according to the speaker configuration. See "Sound modes and channel output" (v p. 242) for the sound modes that are
supported.
Front panel Display
Playback Settings
ZONE2
2-channel (Pre-out)
2-channel (Pre-out)
2-channel (Pre-out)
2-channel (Pre-out)
2-channel (Pre-out)
2-channel (Pre-out)
2-channel (Pre-out)
2-channel (Pre-out)
2-channel (Pre-out)
2-channel
(Speaker out)
39
Rear panel
Tips
"Amp Assign" settings
Can be set in all "Amp Assign" modes.
Surround Back
Front Height
Top Front
Top Middle
Front Dolby
Surround Dolby
Bi-Amp
Front B
ZONE2 (Default)
Remote Index
Appendix
Connection
page
40
41
42
43
44
45
46
47
48
49