Subnet Mask - Denon AVR-X2400H Owner's Manual

Integrated network av receiver
Hide thumbs Also See for AVR-X2400H:
Table of Contents

Advertisement

Contents
Connections
o DHCP
Selects how to connect to the network.
On
(Default):
Off:
o IP Address
Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses
0
are set.
CLASS A: 10.0.0.1 - 10.255.255.254
CLASS B: 172.16.0.1 - 172.31.255.254
CLASS C: 192.168.0.1 - 192.168.255.254
o Subnet Mask
When connecting an xDSL modem or connector adapter directly to
this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input "255.255.255.0".
Front panel
Display
Playback
Configure the network settings
automatically from your router.
Configure the network settings manually.
Rear panel
Settings
o Default Gateway
When connected to a gateway (router), input its IP address.
o DNS
Enter the DNS address indicated in the documentation supplied by
your provider.
0 If you cannot connect to the Internet, recheck the connections and settings.
(v p. 61)
0 If you do not understand about Internet connection, contact your ISP (Internet
Service Provider) or the store from which you purchased your computer.
194
Remote
Tips
Appendix
Index

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-s930h

Table of Contents