Playback In Zone2 - Denon AVR-X2400H Owner's Manual

Contents Connections

Playback in ZONE2

ZONE2
Input source
select
buttons
:
MUTE
Front panel Display
Playback
1
2
X
POWER
3
VOLUME df
133
Rear panel
Settings Tips
Press ZONE2 to set the operating zone to ZONE2 with
the remote control.
The ZONE2 button lights.
Press POWER X to turn on the ZONE2 power.
The ( indicator on the display lights.
Power in ZONE2 can be turned on or off by pressing ZONE2
0
ON/OFF on the main unit.
Press the input source select button to select the input
source to be played.
The audio signal of the selected source is output to ZONE2.
To perform an operation with the main unit, press ZONE2
0
SOURCE. Each time you press ZONE2 SOURCE, the input
source changes.
Remote Index
Appendix