Audyssey - Denon AVR-X2400H Owner's Manual

Contents Connections

Audyssey

®
Set Audyssey MultEQ XT, Audyssey Dynamic EQ
®
Dynamic Volume . These can be selected after Audyssey
®
been performed.
For additional information on Audyssey technology, please see
"Explanation of terms" (v p. 250).
0 "MultEQ ® XT", "Dynamic EQ", "Reference Level Offset" and "Dynamic Volume"
settings are stored for each input source.
0 When the sound mode is in the "Direct" or "Pure Direct" mode, "MultEQ
"Dynamic EQ" and "Dynamic Volume" settings cannot be configured.
Front panel Display
Playback
o MultEQ
and Audyssey
®
Setup has
®
® XT",
148
Rear panel
Settings Tips
® XT
MultEQ ® XT compensates for both time and frequency characteristics
of the listening area based on Audyssey
Selection is done from three types of compensation curves. We
recommend the "Reference" setting.
Selects the default calibrated setting with
Reference
a slight roll off at high frequencies, which
(Default):
is optimized for movies.
Selects the reference setting, but
L/R Bypass: bypasses MultEQ
and right speakers.
Selects the calibrated setting which is
optimized for small rooms where your
Flat:
listening position is closer to the
speakers.
Off: Do not use "MultEQ
0 When using headphones, "MultEQ
Remote
Appendix
® Setup measurement results.
® XT on the front left
XT".
®
® XT" is automatically set to "Off".
Index