Progressive Mode; Aspect Ratio - Denon AVR-X2400H Owner's Manual

Contents Connections
o Resolution
Set the output resolution.
Auto
(Default):
480p/576p / 1080i /
720p / 1080p /
1080p:24Hz / 4K :
0 When set to "1080p:24Hz", you can enjoy film-like pictures for film sources (in
24 Hz). For video sources and mixed sources, we recommend setting the
resolution to "1080p".
0 It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output at a
resolution of 1080p/50Hz.
0 This item can be set when "i/p Scaler" is set to "On". (v p. 160)
Front panel Display
Playback
The resolution supported by the TV
connected to the HDMI MONITOR OUT
connector is detected automatically and
the appropriate output resolution is set.
Set the output resolution.
Rear panel
Settings
o Progressive Mode
Set an appropriate progressive conversion mode for the source video
signal.
Auto
(Default):
Video:
Video and Film:
0 This item can be set when "i/p Scaler" is set to "On". (v p. 160)
o Aspect Ratio
Set the aspect ratio for the video signals output to the HDMI.
16:9
(Default):
4:3 :
0 This item can be set when "i/p Scaler" is set to "On". (v p. 160)
161
Remote
Tips Appendix
The video signal is automatically
detected and the appropriate mode is
set.
Select mode suitable for video playback.
Select mode suitable for video and 30-
frame film material playback.
Output at 16:9 aspect ratio.
Output at 4:3 aspect ratio with black bars
on the sides of a 16:9 TV screen. (except
for 480p/576p output)
Index