Playback In Zone2 (Separate Room) - Denon AVR-X2400H Owner's Manual

Contents Connections

Playback in ZONE2 (Separate room)

You can operate this unit to enjoy audio in a room (ZONE2) that is different from the room where this unit is placed (MAIN ZONE).
You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE
and ZONE2.
0 It is not possible to play the digital audio signals input from the HDMI, COAXIAL or OPTICAL connectors in ZONE2. Use analog connections for ZONE2 playback.
Connecting ZONE2
You can use the following two methods to play back audio in ZONE2.
"Connecting using a speaker output terminal" (v p. 131)
0
"Connecting using an external amplifier" (v p. 132)
0
Front panel Display
Playback Settings
o Connection 1: Connecting using a speaker
When "Assign Mode" is set to "ZONE2" in the menu, ZONE2 audio is
output from the SURROUND BACK speaker terminal. (v p. 179)
131
Rear panel
Tips
output terminal
MAIN ZONE
This unit
(R)
Remote Index
Appendix
(L)
ZONE2