Table of Contents
Advertisement
• Spot/ESC: Return to the previous menu; press to open/close Spot mode.
• MENU/
: Open the system main menu; move cursor up when navigating menus.
• LV/PB: Switch between live view and playback modes.
• ALARM RESET/
• STATUS/
: Open system status menu; confirm selections, advance options when navigating
menus.
• D-ZOOM/
: Control zoom +/-; move cursor right when navigating menus.
• AUTO/(F-): Start Auto Sequence mode; decrease value of selected menu option; focus control of PTZ
camera*
• PIP/
: Enter Picture-in-Picture mode; move cursor down when navigating menus.
• FREEZE/(F+): Open/close Freeze Mode; press to increase value of selected menu option; focus
control of PTZ camera*
3. Playback Buttons: Click the following to control playback, search, and PTZ:
• REC: Click to start/stop recording.
• SLOW: Click to slow down playback speed.
• PB/PAUSE: Click to pause playback; press again to resume playback.
• FAST: Click to increase playback speed: 1X, 2X, 4X, 16X, 32X, 64X, 128X.
• DIR: Click to switch between Reverse and Forward playback.
• SEARCH/PRESET: Click to open the Search Menu; enter the preset while in PTZ mode.
• COPY/AF: Click to open the Copy Menu; enable Auto-Focus while in PTZ mode.
• PTZ: Click to open PTZ mode (PTZ camera must be connected).
PTZ Controller
Use the PTZ Controller to remotely control any connected PTZ cameras (not included).
NOTE: You must have a PTZ camera connected to your DVR in order to use the PTZ Controller.
Figure 22.2 PTZ Controller
To use the PTZ Controller:
1. Click
to open the PTZ Controller.
2. Click the drop-down menu and to select the channel with a connected PTZ camera.
3. Click the AF buttons to pan/tilt the camera.
: Release the Event buzzer; move cursor left when navigating menus.
Controlling Your System
75
Advertisement
Table of Contents
