Table of Contents
Advertisement
APPENDIX I: USING LISTEN-IN AUDIO
Listen-in audio allows you to listen to, and record live audio on the system one channel at a time.
You can connect two audio channels (mono) per RCA-female Y-adapter. Use both RCA-female
Y-adapters included with the system to connect up to four audio channels.*
AUDIO CAPABLE CAMERAS
(connect video via octopus cable)*
Figure 35.0 Audio connection diagram
To enable listen-in audio:
1. Connect the included RCA Y-adapter to the Audio In port on the rear panel of the system.
NOTE: Each audio cable is for a single audio channel, not stereo left and right audio from a
single source.
2. Connect audio RCA-male cables from your audio source (i.e. audio capable camera,
microphone) to the RCA-female cables in the Y-adapter.
3. Press the
button to open the Main Menu.
4. Select RECORD and press the
5. From the Record menu, select AUDIO RECORD and press the
6. Press the
7. Press the
button on the remote control until you see the Save/Exit screen. Select SAVE
ONLY or SAVE AND EXIT to save your settings.
8. Press the
button on the remote control to switch between audio channels 1~4.
118
RCA Y-ADAPTER*
(RCA female)
button.
buttons and the
buttons to set Audio Channels 1~4 ON/OFF.
DVR
LINE AUDIO / SPEAKERS
* Use two RCA-female Y-adapters to connect up to four audio
channels.
(not included)
button.
Advertisement
Table of Contents
