Stapler Displacement Motor - Ricoh D197 Service Manual

1.5.7 STAPLER DISPLACEMENT MOTOR


When the finisher is inverted, be careful not to deform the frame.
1. Paper output cover (page 5).
2. Remove the four clamps ( ×4).
3. Place the inner finisher upside down on the table with holding the parts below [A].

Hold the parts [A] shown below to lift the inner finisher. Otherwise, other brackets and
parts may be deformed.
4. Base cover [A] (
5. Stapler displacement motor [A](
SM
×3)
×2,
27
×1)
Motors
D690