Cutter Unit Cutter Unit; Replacing The Cutter Unit - Canon ipf8300 User Manual

Cutter Unit
Cutter Unit ..................................................................................................................................................... 1011

Replacing the Cutter Unit .............................................................................................................................. 1011

Cutter Unit
The printer can use the following Cutter Unit.
• Cutter Unit CT-06
Note
• For instructions on Cutter Unit replacement, see "Replacing the Cutter Unit."
Replacing the Cutter Unit
Note
• For information on compatible cutter units, see "Cutter Unit."
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Set./Adj. Menu is displayed.
3.
Press ▲ or ▼ to select Maintenance, and then press the OK button.
4.
Press ▲ or ▼ to select Change Cutter, and then press the OK button.
The Carriage moves to the center, and a message on the Display Screen requests you to open the Top Cover.
Note
• If you do not respond within two minutes, cutter cleaner replacement is canceled. In this case, repeat
the procedure.
iPF8300
Downloaded from ManualsPrinter.com Manuals
Maintenance
→P.1011
→P.1011
> Cutter Unit >
).
11
1011
Cutter Unit