Installing The Cpu Cooling Module And Fan(For Intel Cpu) - Toshiba PSLC8U-03L023 - Satellite L305D-S5927 - Athlon X2 2.16 GHz Maintenance Manual

4 Replacement Procedures

Installing the CPU Cooling Module and Fan(For Intel CPU)

Install the cooling Module according to the following procedures and Figures 4-17, 4-18 and
4-19.
CAUTION: When installing the cooling module, keep the following in mind:
1. Be sure to confirm the correct position for the module.
2. Secures the relevant screws on the main board according to the number sequence
sealed on heat sink module.
NOTE: Apply silicon grease with a special syringe to cover the surface of the CPU chip
completely.
1. If silicon grease is already applied to the CPU and fan module, wipe them off with a
cloth.
By using a special syringe, apply silicon grease G7762 to the CPU chip center so that
the entire CPU chip is covered with the grease G7762.
2. Install the CPU cooling module into the correct position on the system board.
3. Place the CPU cooling module and bracket in the correct position and secure it with
two M2x3 white flat-head screws.
4. Place the fan in the correct position and secure it with two M2.5x5 black flat head
screws.
5. Connect the fan cable to CN501 on the system board.
4-36
Satellite L300/L305 / Satellite Pro L300/ EQUIUM L300/ SATEGO L300 Maintenance Manual
Figure 4-19 Applying silicon grease
4.10 CPU Cooling Module and Fan