Required Features - IBM eserver i5 Handbook

Draft Document for Review October 18, 2004
DVD-RAM. The second slimline bay is straight IDE and is usable only with
AIX 5L or Linux partitions on 9406 systems.
– In the rack drawer configuration, the bottom bay is for the operator panel.
With a deskside configuration, the operator panel is mounted in a separate
bracket attached to the top of the system. The bottom bay in a deskside
configuration is left empty and is covered by a plate insert.
Two serial ports and two USB 2.0 ports
These ports are not usable by i5/OS.
Two 1 Gb, 100 Mb, and 10 Mb Ethernet ports
These ports are not usable for a local area network (LAN) console.
Base Service Processor (CCIN 28D7) (plugs in slot P1-C7)
Two HMC ports and two SPCN ports
Two high-speed loop (HSL)-2/RIO-G ports
#9844 Base PCI IOP (plugs in slot P1-C6)
This provides support for up to two IOAs (slots P1-C3 and P1-C5).

Required features

required
The
Specific combinations of the Processor feature, Edition feature, and Server
feature are allowed as shown in the following table.
Processor
#8950
#8951
#8952
#8953
#8954
features for the 520 system unit include:
Server Edition feature
feature
#0900 #7390, #7391, #7393 Express
#7450 Value
#0901 #7392, #7394 Express
#7451 Value
#0902 #7458 Standard
#7459 Enterprise
#0903 #7452 Standard
#7453 Enterprise
#0904 #7454 Standard
#7455 Enterprise
5486m520.fm
Software Processor feature
group code or
QPRCFEAT value
P05 7450
P10 7451
P10 7458
P10 7459
P10 7452
P10 7453
P20 7454
P20 7455
iSeries Model 520
113