Mazda Radar Cruise Control - Mazda CX-5 Smart Start Manual

M A Z DA RA DAR C RUI S E CON T RO L
WIT H STOP & GO F UN CT ION (I F EQUI PP ED)
MAZDA RADAR CRUISE CONTROL (MRCC)
WITH STOP & GO FUNCTION
WARNING:
Do not rely
completely on the
MRCC with Stop
& Go function
and always drive
carefully obeying
the speed limit.
WARNING:
Switch the MRCC
system off when
it is not in use.
DO NOT get out
of the vehicle
while the stop
hold control
is operating.
NOTE:
The radar for the MRCC with Stop & Go function is located behind the Mazda
emblem in the grille. Keep this area clean to ensure the system works properly.
How to set the speed:
1 Adjust the vehicle to the desired speed using the accelerator pedal.
2 Push the SET + or SET – switch. The set speed and the inter-vehicle distance display filled
with white lines are displayed in the multi-information display and the MRCC indicator light
(green) turns on simultaneously.
3 Push the center of the RESUME switch to resume set speed.
25
MAZDAUSA.COM
The MRCC with Stop & Go function maintains vehicle speed and
following distance using a radar sensor to detect a vehicle ahead.
The driver simply presets the vehicle speed between 0 mph and
90 mph and the system will maintain a safe following distance
without having to turn the cruise control off or use the accelerator
or brake pedals. If the vehicle ahead stops while you are following
behind it, your vehicle will stop automatically.
The system operates in two modes:
CONSTANT SPEED MODE: When no
vehicle is detected ahead, the driver's set
speed is maintained.
HEADWAY CONTROL MODE: When a vehicle
is detected ahead, a distance between your
vehicle and the vehicle ahead is maintained.
Setting the MRCC with Stop & Go function:
When the Mode switch is pushed, the vehicle speed and the distance
between vehicles while in headway control can be set. The MRCC
with Stop & Go function indication is shown in the multi-information
display. The indicator light in the multi-information display will be
green and will turn on simultaneously.
MODE DISPLAY
Constant
Speed
Headway
Control
Vehicle ahead
MRCC Distance
between vehicle
MRCC Set
vehicle speed