Active Driving Display - Mazda CX-5 Smart Start Manual

ACT IV E DR IV I NG DI S PL AY
(I F EQUIPPED)

ACTIVE DRIVING DISPLAY

To change the settings/adjustments for the Active Driving Display:
1 Select the Settings icon on the Home screen.
2 Select the AD-Disp tab.
3 Select the desired item to change.
HEIGHT: Adjust the position of the virtual image of
the Active Driving Display up or down.
BRIGHTNESS CONTROL: Method for adjusting
screen brightness (automatically with instrument
cluster illumination or manually).
BRIGHTNESS: Brightness adjustment (when
selecting manual adjustment).
ROTATION
NAVIGATION: On/Off.
DISPLAY INFORMATION
ACTIVE DRIVING DISPLAY
RESET: Reset to default settings.
NOTE:
• If the display does not operate, switch the ignition
off and then switch it back on. If it still does not
operate even with the ignition switched ON,
have the vehicle inspected at an Authorized
Mazda Dealer.
• It may be difficult to view the display when
wearing sunglasses. Take off your sunglasses or
adjust the luminosity.
• If the battery has been removed and re-installed
or the battery voltage is low, the adjusted position may deviate.
• The display may be difficult to view or be temporarily affected by weather conditions
such as rain, snow, light, and temperature.
Vehicle Speed Setting
using cruise control
Navigation Turn-By-Turn
(TBT) direction, distance
and lane guidance
Traffic Sign Recognition
(TSR) using navigation
55
Speed Limit
IF EQUIPPED
Lane Departure Warning
System (LDWS) operation
conditions and warnings
Smart Brake Support
(SBS) warnings
Vehicle Speed Setting
using cruise control
m{zd{ cx-5
22