Mazda CX-5 Smart Start Manual page 27

How to set the distance between vehicles:
The distance between vehicles is increased by pushing the
switch and decreased by pushing the
distance between vehicles can be set to four levels.
Switching to conventional cruise control function:
When the Mode switch is pushed while the MRCC with Stop
& Go function system is turned on, the system is switched to
conventional cruise control function.
The MRCC with Stop & Go function indicator light (green) in
the instrument cluster turns off and "Radar Cruise Control
deactivated" message is displayed in the multi-information
display at the same time.
CLOSE PROXIMITY WARNING
While traveling in headway control, if your
vehicle rapidly closes in on a vehicle ahead
because the other driver applied his or her
brakes suddenly, a warning sound activates and the BRAKE! warning is indicated in the
display. Always verify the safety of the surrounding area and depress the brake pedal while
keeping a safe distance from the vehicle ahead. Additionally, always keep a safe distance
from the vehicles behind you.
NOTE:
The MRCC with Stop & Go function sometimes will brake your vehicle when
encountering a semi truck (tractor trailer). This is normal. Simply push the accelerator
pedal to override the system.
MRCC with Stop & Go
function Set Switch
Distance
Control
(Longer /
Shorter )
MODE
(ON)
DISTANCES
switch. The
(about 82 ft)
m{zd{
Cruise
Control
(SET+/
RESUME/
SET –)
CANCEL/OFF
BETWEEN
DISPLAY
VEHICLES
(at 50 mph)
Long
(about
164 ft)
Medium
(about
131 ft)
Short
(about
98 ft)
Extremely
Short
cx-5
26