Mazda Radar Cruise Control; Cruise Control - Mazda CX-3 Smart Start Manual

M A Z DA RA DA R CRUI S E CO N T ROL
( I F EQ U I P P E D)
MAZDA RADAR CRUISE CONTROL (MRCC) SYSTEM
The MRCC system maintains vehicle speed and following distance using a radar sensor
to detect a vehicle ahead. The driver simply presets the vehicle speed between 19 mph
and 90 mph and the system will maintain a safe following distance without having to
turn the cruise control off.
Active Driving Display
MRCC
WARNING:
MRCC shuts off
when it reaches
the low mph limit.
The vehicle will
not brake/stop by
itself. Switch the
MRCC system off
when not in use.
How to set the speed:
1 Adjust the vehicle to the desired speed using the accelerator pedal.
2 Push the SET + or SET – switch. The set speed and the inter-vehicle distance display
filled with white lines are displayed in the Active Driving Display and the MRCC indicator
light (green) turns on simultaneously.
20
MAZDAUSA.COM
SETTING THE MRCC:
When the MODE switch is pushed, the
vehicle speed and the distance between
vehicles while in headway control can be
set. The MRCC indication is shown in the
Active Driving Display.
NOTE:
The radar for the MRCC is located
behind the Mazda emblem in the grille.
Keep this area clean to avoid the system
not working properly.
Vehicle
ahead vehicle speed
MRCC distance
between vehicles
OPERATION MODES
MODE
Constant
Speed
Headway
Control
MRCC set
DISPLAY