Wp810 Web Gui Settings; Status Page Definitions; Status/Account Status; Status/Network Status - Grandstream Networks WP810 Administration Manual

WP810 WEB GUI SETTINGS

This section describes the options in the WP810 Web UI. As mentioned, you can log in as an administrator
or an end user.

Status: Display account status, network status and system info.

Accounts: Configure accounts with general settings, SIP settings, codec settings, call settings and
advanced settings.

Settings: Configure general settings, call settings, ringtone, Video Settings, Multicast paging

Network: Wi-Fi settings, and advanced network settings.

Maintenance: Configure upgrade and provisioning settings and system diagnosis.

Directory: Configure phonebook settings and Call History

Status Page Definitions

Status/Account Status

Account Displays list of configured accounts.
SIP user ID Displays the numbers of the configured accounts.
SIP Server Displays list of SIP Server user by the configured accounts.
SIP Registration Shows the status of SIP registration. If the SIP account is successfully registered,
it will display "Registered" with green background. If the SIP account is not
registered, it will display "Unregistered" with grey background.

Status/Network Status

MAC Address Shows Device ID in hexadecimal format. This is needed by network administrators
for troubleshooting. The MAC address will be used for provisioning and can be
found on the label on original box and on the label located on the bottom panel of
the device.
Indicates the configured address mode: DHCP or Static IP
IPv4 Address Mode
Displays assigned IP address. Example: 192.168.5.110
IPv4 Address
Subnet Mask Displays assigned subnet mask. Example: 255.255.255.0
Gateway Displays assigned default gateway. Example: 192.168.5.1
WP810 Administration Guide
Version 1.0.7.83
P a g e | 32