Draytek vigor2760 series User Manual page 274

Server Address
Destination Port
Use SSL
Regular DN
Regular Password
After finished the above settings, click OK button to save the settings.
3 . 9 . 5 . 2
3 . 9 . 5 . 2
You can configure eight AD/LDAP profiles. These profiles would be used with User
Management for different purposes in management.
Click any index number link to open the following page.
Vigor2760 Series User's Guide
P r o f i l e s
P r o f i l e s
For the regular mode, you'll need to type in the Regular
DN and Regular Password.
Enter the IP address of LDAP server.
Type a port number as the destination port for LDAP
server.
Check the box to use the port number specified for SSL.
Type this setting if Regular Mode is selected as Bind
Type.
Specify a password if Regular Mode is selected as Bind
Type.
258