Omron V600-CA1A Operation Manual page 38

Discontinued Models and Replacements
Model Changes
Discontinued Models
All 500-kHz models have been discontinued.
R/W head: V600-H06
Data carriers: V600-D2KR01, V600-D8KR01, V600-D2KR02, V600-D8KR02, V600-D2KR03, V600-D8KR03
From now on, please use 530-kHz models.
Replacement Models
The following table shows the models that are replacing each of the discontinued models.
Note 1. The V600-H12 has the same specifications as thee V600-H06 except for the transmission range. The
V600-H11 is a compact, low-cost model.
2. The V600-D8KR11 can be flush-mounted in a metal casing. If the V600-DKR04 flush-mounted, the
restriction illustrated below applies. (In the V600-DKR04 diagram, the transmission range changes
according to distance x.
V600-D8KR11
Flush-mounted
É É É É É É É É
É É É É É É É É
Metal
É É É É É É É É
The following diagrams show the effect of the surrounding metal on the transmission range.
V600-H11/V600-D8KR04
(Shaft slip:
R/W Head
Gap between R/W Head and metal (x)
Discontinued model (500 kHz)
V600-H06
V600-DjKR01
V600-D8KR02
V600-D8KR03
20 mm max.
±
0 mm)
DC
(over 100 mm)
Replacement model (530 kHz)
V600-H11 or V600-H12 (See note 1.)
V600-D8KR11 or V600-D8KR04 (See note 2.)
V600-D8KR12
V600-D8KR13
V600-DKR04
Flush-mounted
x (mm)
Metal
V600-H12/V600-D8KR04
(Shaft slip:
R/W Head
Gap between R/W Head and metal (x)
Appendix B
x (mm)
20 mm max.
±
0 mm)
DC
(over 100 mm)
37