Safety Measures - Hoover T 185 E/1 User Instructions

EN
SAFETY
MEASURES
IMPORTANT:
FOR ALL CLEANING
AND MAINTENANCE
WORK
•Remove the plug
•Turn off the water inlet tap.
•HOOVER fits all its machines
with an earth conncetion.
Ensure that the electrical
installation has an earth
connection and that it is
connected; if not call for service.
The earth connection is
essential for user safety, as it
eliminates the risk of electrical
discharge.
The manufacturer cannot
accept any responsibility
for any damage or injury
due to connection
problems or faults, a
defective earth connection
or for not having
connected it.
•Do not touch the appliance
with wet or damp hands or feet.
•Do not use the appliance when
bare-footed.
•Extreme care should be taken
if extension leads are used in
bathrooms or shower rooms.
Avoid this where possible.
WARNING: DURING THE
WASHING CYCLE, THE
WATER CAN REACH A
TEMPERATURE OF 90 ° C.
RU
6
EN
•Do not use adaptors or
multiple plugs.
•Do not allow the appliance to
be used by children without due
supervision.
•Do not pull the mains lead or
the appliance itself to remove
the plug from the socket.
•Do not leave the appliance
exposed to atmospheric agents
(rain, sun etc.)
Important!
Do not install the washing
machine on a surface which
blocks the space be ween the
floor and the base of the
appliance, like for example,
carpets, rugs, etc., as this could
cause overheating due to lack
of ventilation.
•Lift the appliance in pairs as
illustrated in the diagram.
•In the case of failure
and/or bad functioning, turn the
washing machine off, close the
water inlet tap and do not
tamper with the appliance.
Contact a HOOVER Technical
Assistance Centre for any
eventual repairs and ask for
original HOOVER spare parts.
Avoidance of these points may
compromise the safety of the
appliance.
RU
7