Wireless - Technicolor TG588v v2 Setup And User Manual

4.3.4 Wireless

The Wireless card
The Wireless card displays:
• The status of the wireless access point (enabled or disabled).
• The network name (SSID) of the wireless access point.
Wireless ON/OFF switch
In the Wireless card header, you can see whether the wireless interface is enabled or not. If the switch is set to:
• then the wireless radio is enabled. Clicking the switch will disable the wireless radio. As a result all access points on
your TG588v v2 will be switched off.
• then the wireless radio is disabled. Clicking the switch will enable the wireless radio.
This is in fact the software equivalent of the Wireless button on the housing.
For more information, see
The Wireless page
Click the Wireless card header to open the Wireless page.
On the left of the Wireless page you can select the access point that you want to configure:
For each access point, you can:
• View or change the wireless interface settings.
• View or change the access point settings
• Start a WPS push button configuration
• Generate a QR code to connect a wireless client.
Configuration examples
In this Setup and User Guide you can find information on how to:
• Change the wireless security settings.
For more information, see
• Configure and use WPS.
For more information, see
• Use the QR code.
For more information, see
DMS3-CTC-25-42 v1.0
"Wireless button" on page
"3.4 Securing your wireless connection" on page
"3.1 Connecting your wireless client via WPS" on page
"3.3 Connecting your wireless client by scanning a QR code" on page
8.
24.
20.
4 TG588v v2 web interface
23.
36