Configuring Wpa-Enterprise Encryption - Technicolor TG588v v2 Setup And User Manual

3.4.2 Configuring WPA-Enterprise encryption

Requirements
• A RADIUS server must be readily set up on your local network.
Procedure
Proceed as follows:
1 Browse to the TG588v v2 web
For more information, see
2 Click Wireless. The Wireless page appears.
3 In the Security Mode list under Access Point, select one of the following modes:
WPA2

 WPA+WPA2
For more information, see
4 The following RADIUS settings are now available for configuration:
 RADIUS Authentication Server's IP: enter the IP address of your RADIUS server.
 RADIUS Authentication Server's port: enter the WPA RADIUS Port.
RADIUS Authentication Server's secret: enter the WPA RADIUS Key.

5 Click Save to apply your changes.
6 Reconnect your wireless client(s) to your TG588v v2.
For more information, see
DMS3-CTC-25-42 v1.0
interface.
"4.1.1 Accessing the TG588v v2 web interface from your local network" on page
"Encryption types" on page 24.
"3.2 How to manually connect a wireless client" on page
3 Wireless networking
29.
22.
26