Recording; Recording Settings - D-Link DCS-7110 User Manual

Configuration
Click Add to open the recording setting page. In this page, you can define the recording source, recording schedule, and recording capacity. A total
of two recording setting can be configured.
Recording name: Enter a name for the recording setting
Enable this recording: Select this option to enable video recording
Priority: Select the relative importance of this recording setting (High, Normal, or Low).
Source: Select the recording source (stream 1 ~ 4).
Trigger: Select a trigger source.
Schedule: The server will start to record files on the network storage (NAS).
Recording Schedule: Specify the recording duration.
1. Select the days of the week.
2. Select the recording start and end times in 24-hr time format, or select Always.
Destination: Select where you want to save the recorded video files.
Capacity: You can choose either the entire free space available or limit the reserved space.
The recording size limit must be larger than the reserved amount for cyclic recording.
File name prefix: Enter the text that will be appended to the front of the file name.
Enable cyclic recording: If you select this item, when the maximum capacity is reached,
the oldest file will be overwritten by the latest one. The reserved amount is reserved for
cyclic recording to prevent malfunction. This value must be larger than 15 Mbytes.
D-Link DCS-7110 User Manual

Recording

Recording Settings

62