D-Link DCS-7110 User Manual page 36

Configuration
PPPoE: Select this option to configure the camera to connect to a PPPoE connection. Follow
the steps below to acquire the camera's public IP address.
1. Set up the camera on the LAN
2. Go to Live View > Setup > Event management > Event settings > Server Settings
(refer to "Event Settings" on page 60 to add a new e-mail or FTP server)
3. Go to Setup > Event management > Event settings > Media Settings (refer to "Media
Settings" on page 57). Select System log so that you will receive the system log in TXT
file format which contains the camera's public IP address in your e-mail or on the FTP
server.
4. Go to Setup > Network > IP settings. Select PPPoE and enter the user name and
password provided by your ISP. Click Save to enable the setting.
5. The camera will reboot.
6. Disconnect the power to the camera and remove it from the LAN environment.
D-Link DCS-7110 User Manual 36