Recording; Recording Settings - D-Link DCS-6116 User Manual

Section 3 - Configuration
Click Add to open the recording setting page. In this page, you can define the
recording source, recording schedule, and recording capacity. A total of 2 recording
setting can be configured.
Recording name: Enter a name for the recording setting.
Enable this recording: Select this option to enable video recording.
Source: Select the recording source (stream 1 ~ 4).
Trigger: Select a trigger source.
Schedule: The server will start to record files on the destination storage (SD).
Recording Schedule: Specify the recording duration.
1. Select the days of the week.
2. Select the recording start and end times in 24-hr time format.
Destination: You can select the network storage or local SD card that was set up for
the recorded video files.
When completed, select Enable this recording. Click Save to enable the setting and
click Close to exit this page. When the system begins recording, it will send the
recorded files to the Destination storage.
The new recording name will appear in the drop-down list on the recording page.
To remove a recording setting from the list, select a recording name from the drop-
down list and click Delete.
D-Link DCS-6116 User Manual

Recording

Recording Settings

60