D-Link DCS-7110 User Manual page 39

Configuration
RTSP
To utilize RTSP streaming authentication, make sure that you have set a password for
the camera first. Refer to "User Settings" on page 67 to set a password.
Authentication: Depending on your network security requirements, the camera
provides three types of security setting for streaming via RTSP Protocol: Disable, Basic,
and Digest.
• If Basic authentication is selected, the password is sent in plain text format
and there can be potential risks of being intercepted.
• If Digest authentication is selected, user credentials are encrypted using
MD5 algorithm and thus provide better protection against unauthorized
access.
Access Name for Stream 1 ~ 5: This camera supports multiple streams simultaneously.
The access name is used to differentiate the streaming source. If you want to use an
RTSP player to access the camera, you have to set the video mode to H.264 or MPEG-4
and use the following RTSP URL command to request transmission of the streaming
data: rtsp://x.x.x.x/live.sdp where the x.x.x.x represents the IP address of your camera.
RTSP port: By default, the RTSP port is set to 554. You can assign it to another port
number between 1025 and 65535. This value must be an even number.
RTP port for video: By default, the RTP (video) port is set to 5556. You can assign it to
another port number between 1025 and 65534. This value must be an even number.
RTCP port for video: This port will always be assigned automatically depending on
the RTP port for video value.
D-Link DCS-7110 User Manual 39