Custom Views - Honeywell ST 700 User Manual

16.2.17

Custom Views

FDC provides you a unique feature wherein you can choose what you want to view in a device and
thus creating your own custom views. This is a very convenient utility when you are interested in a
few variables in a device and saves you the time for navigating through the menus.
You can create two views per device type with maximum of 10 variables selected for each custom
view.
To create/modify the custom views:
On the Device homepage, tap My Views.
1.
Tap Configure and tap Select.
2.
The Configure My Views dialog box appears.
To customize View1 and View2, click the variables by checking the box against desired
3.
variables.
Tap
4.
Once done, tap Options to click Save My Views.
5.
Two custom views are ready with selected variables.
Note: Since a custom view can contain only up to 10 variables each, a warning is
displayed if you have selected more than 10 variables.
To rename the views, perform the following:
Tap Options > Rename View1.
5.
A dialog box appears informing you to enter the name.
Tap Ok.
6.
Tap Option>Save to persist the change
7.
Tap Return to return to My Views page. You would see two options with the names you
8.
gave to the newly created views.
Note: To view the custom views, tap My View 1 > Select.
The My View 1 page appears.
Revision 4.0
or to navigate to previous and next set of variables.
ST 700 Series HART/DE Option User's Manual
Page 145