Electronic Display; Lock Symbol - Fisher & Paykel DD603(I) Manual

C o n t r o l P a n e l
C o n t r o l P a n e l
P C
P C
R I M A R Y O N T R O L
R I M A R Y O N T R O L
POWER
Power Button
Press the POWER button to turn the DishDrawer® on or off. To end the wash programme in mid
cycle, press the POWER button. Any water in the DishDrawer® will be pumped out.
Start/Pause Button
The START/PAUSE button starts and pauses the dishwasher. Always press the START/PAUSE
button and wait for three beeps before opening the DishDrawer®.
If the DishDrawer® is in pause mode for more than 7minutes the machine will beep every 90
seconds to remind someone that the machine is in pause mode. Press the Start/Pause button to
restart it.
Lock Button
This button activates keylock or childlock. When the LOCK symbol is displayed it indicates that this
feature is on.
Keylock disables all the buttons on the DishDrawer®. To activate press and hold the lock button for
3 seconds until you hear one beep
Childlock disables all the buttons on the DishDrawer® in addition to locking the drawer. To activate,
press the lock button for 5 seconds until you hear two beeps.
To deactivate the LOCK function, press and hold the lock button until you hear one beep

Electronic Display

The Electronic Display shows progress through the wash programme and time remaining. It also
shows fault codes as they occur, delay start & lock.
Delay Start Mode
The start time of the DishDrawer® can be delayed by 1-12 hours.
To activate the delay start mode, press and hold the START/PAUSE button until the delay symbol
appears on the electronic display. Continue to hold the button until the desired time has been
reached. The DishDrawer® will start when the time has elapsed.
To cancel Delay Start, press the POWER button or hold the START/PAUSE button until the delay
symbol disappears.
P ( P
P ( P
A N E L R E F I N I S H E
A N E L R E F I N I S H E
ELECTRONIC
DISPLAY
)
)
D
D

LOCK SYMBOL

START/PAUSE LOCK