Use The Timer - Philips FLAT TV 52PFL7803D User Manual

Advance Picture
Contrast +
Active Control
Artifacts Reduction*
Dig. Natural Motion*
Í to return to the previous menu
5. Press
or press ANALOG MENU to exit.
8.2

Use the Timer

To switch the TV to standby mode or to a
specified channel at a specified time from
standby mode or while the TV is switched
on.
Set the sleep timer
SOURCE and Î or ï to select
1. Press
TV from the source list.
2. Press ANALOG MENU to display the
on-screen menu.
3. Sselect Features > Timer > Sleep, and
press OK.
Timer
Sleep
Time
Start Time
Stop Time
Channel No.
Activate
4. Press ï or Î to select the number
of minutes remaining before the TV
automatically switches to standby mode
and press OK to select.
5. Press Í to return to the previous menu
or press ANALOG MENU to exit.
Tip : Press STATUS / EXIT to check
E
Off
On
Off
15
30
45
60
90
120
180
if the sleep timer is enabled or time
remaining for the TV to switch to standby
mode.
To cancel the sleep timer, select Off in
the Sleep menu.
Set the TV time
SOURCE and Î or ï to select
1. Press
TV from the source list.
2. Press ANALOG MENU to display the
on-screen menu.
3. Select Features > Timer > Time, and
press OK.
Timer
Sleep
Time
Start Time
Stop Time
Channel No.
Activate
4. Press the numeric (
remote control to enter the time in the
24-hour format. For example, 13:00 (for
1.00 p.m).
5. Press Í to return to the previous menu
or press ANALOG MENU to exit.
Set the TV timer
1. Press SOURCE and Î or ï to select
TV from the source list.
2. Press ANALOG MENU to display the
on-screen menu.
3. Select Features > Timer > Start
Time, and press OK.
10 : 45
0-9) buttons of the
EN-33