Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration in its products.
Important Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. Read this user manual before you start to use this product. In particular, pay close attention to this section and follow the safety and screen care instructions.
• Permanent hearing loss may occur if you use earphones or headphones at high volumes. Though high volume may sound normal over time, it can damage your hearing. To protect your hearing, limit the amount of time you use earphones or headphones at high volume.
Overview of television controls and connectors Side controls VOLUME + / - To increase or decrease volume. MENU To display the on-screen menus or to exit from the on-screen menus. The CH + /- buttons can be used to navigate the menu items. The VOLUME + / - buttons can be used to select the menu items.
If necessary, refer to the Quick Start Guide for stand mounting instructions. Position the TV Consider the following before positioning your TV: • The ideal viewing distance for watching TV is three times its screen size. • Position the TV where light does not fall directly on the screen.
Wall-mount the TV WARNING: Wall mounting the TV should only be performed by qualifi ed installers. Konin- klijke Philips Electronics N.V. bears no responsibility for improper mounting that results in accident or injury. Use VESA-compatible bracket Purchase a VESA-compatible wall bracket...
Page 10
Align the plate/bracket to the four mounting nuts, placing the spacers (not supplied) between the plate/bracket and the mounting nuts. Using a spanner, insert the bolts through the plate/bracket and spacers, tightly securing the bolts to the mounting nuts. Continue with the instructions provided with your VESA-compatible wall bracket.
Overview of remote control keys and functions POWER To switch the TV to standby mode if it is already turned on. Or to turn on TV when it is in standby mode. SOURCE To display the input source list or to cycle through list of input sources by repeatedly pressing button.
To select SAP, Stereo or Forced Mono. A/CH (Alternate Channel) To display the last viewed channel and the current channel. INCR. SURR To enable Incredible Surround in stereo mode and Spatial in mono mode. CHANNEL LIST To display the list of available channels. GUIDE (Digital mode only) Electronic Program Guide button To get program listings and information.
Use your TV in digital mode Get Started • When the TV is powered-on for the first time you are prompted to run auto install to receive the channels that are broadcasted locally. • Auto installation takes 20 to 40 minutes depending on the number of channels that are transmitted by the cable provider or broadcaster.
Setup | Installation Total 1 Channels Found Current Scanning Scan percentage Information Analog TV services: Analog Radio services: Digital TV services: Digital Radion services: A service scan is in progress, please press OK to stop. If no digital channels are detected, press ANA/DIGI to switch to analog mode.
Page 15
Channels. If new services are available, press button to enter into the list of services, and press Î or ï to move through the list. Setup Setup | Installation | Service List Installation | Service List View TV Channels Installation 05.1 - TV GloboHD 05.3 - TV GLOBO M Access restrictions...
Caution: Reinstalling services overwrites all your previously stored channels. Press OK to start the installation. A search is for digital services is started. The services are stored automatically. When the search is complete, the menu indicates the number of digital services found.
Repeat the above steps to move other channels. Press Í to return to the previous menu or press DIGITAL MENU to exit. Tip: Press ANA/DIGI to switch be- tween the digital and analog modes. Set your preferences Set your language Select your preferred language, time zone, and digital audio output.
Setup | Preferences Setup Preferences Preferences Digital Audio Output Language Time Zone Digital Audio Output G (G G MT 04:00) Manaus G (G (G G (G G MT 04 00) M GMT-04:00) Manaus Transparency G (G G G (G G MT 05:00) Acre G G G (G (G G MT 05 00) A GMT-05:00) Acre C C C C C l T...
• Audio language: Set to Brazilian Portuguese. • Menu language: Set to Brazilian Portuguese. • Digital audio output: • Time zone: Set to Broadcasted time. • Pin Code: Reset to “1234”. Control access to digital channels Restrict access to the digital channels by blocking them with an access PIN code.
Page 20
The TV displays Incorrect Pin and prompts you to enter the PIN code again. Please enter your pin code Incorrect Pin Cancel * * * * Enter “ 0711”. The PIN code is reset to the default factory setting of “1234”. Please enter your pin code The default pin code is set.
Setup | Access restrictions Setup Access restrictions Access restrictions Block Content Maturity Rating TV GloboHD Block Content Globo M TV Channels Set Pin Protection C C C C C l T C C C olor Temp C C C C C Change Pin Code C C C C t Contrast +...
Setup | Favorites Setup Favorites List 1 List 1 List 1 Favorite List 1 Fa Fa F F a Favorite List 1 Favorite List 1 Add all services Name Select TV channels L L L i t 3 L L L ist 3 L L L List 3 Add all services...
Setup | Information | New Software Select file Select USB disk upgrade.zim USB disk1 Confirmation Do you really want to update? Select file to upgrade. A pop-up window displays an indicator bar while the update is in progress. Setup | Information | New Software Select file Select USB disk upgrade.zim...
Use your TV in analog mode Select your location Set the location to suit a shop floor or home environment. Press SOURCE and Î or ï to select TV from the source list. Press ANALOG MENU to display the on-screen menu. Select Location and press OK.
Install channels Automatically install channels Press SOURCE and Î or ï to select TV from the source list. Press ANALOG MENU to display the on-screen menu. Select Install > Auto Program and press OK. Auto Program Program Auto Program starts scanning for channels automatically.
Manual System Auto Fine Tune NTSC PAL-M PAL-N Í to return to the previous menu Press or press ANALOG MENU to exit. TV Systems • Auto : Detects the tuner system automatically. • NTSC : For North American and some South American countries.
Page 27
displayed on the top left of the screen. Press Í to return to the previous menu or press ANALOG MENU to exit. Store your favorite channels Fav. Program lets you store only the channels you want on a favorite list. Press SOURCE and Î...
Use your TV Adjust TV settings Adjust your picture settings Press SOURCE and Î or ï to select TV from the source list. Press ANALOG MENU to display the on-screen menu. Select Picture Setting and press OK. ï or Î to highlight the menu Press items and press OK to select.
Sound Equaliser Balance Auto Vol. Leveler Incr. Surround Forced Mono Sound Mono Equaliser Spatial Balance Auto Vol. Leveler Incr. Surround Forced Mono Press Í to return to the previous menu or press ANALOG MENU to exit. Sound settings: • Equalizer : Adjusts each individual frequency (tone).
leaving the subtitles area visible. The top of the picture is cropped. • Superzoom : Removes black bands on the sides of the screen of 4:3 format programs. • Widescreen : The picture is displayed in its original proportions. Use Smart Mode settings Smart modes are preset settings to match the different viewing and listening environment.
Use the Surf feature Store up to 8 of your favorite channels in the Surf list. Add channels to your Surf list Press the numeric ( 0-9) buttons or CH + / - to switch to your favorite channel. Press SURF to display the Surf list.
Use more of your TV Use the Advance Picture features Use Contrast + Contrast + optimizes the contrast for overall picture quality. Press SOURCE and Î or ï to select TV from the source list. Press ANALOG MENU to display the on-screen menu.
Advance Picture Contrast + Active Control Artifacts Reduction* Dig. Natural Motion* Í to return to the previous menu Press or press ANALOG MENU to exit. Use the Timer To switch the TV to standby mode or to a specified channel at a specified time from standby mode or while the TV is switched Set the sleep timer SOURCE and Î...
Timer Sleep 20 : 00 Time Start Time Stop Time Channel No. Activate Press the numeric ( 0-9) buttons of the remote control to enter the time in the 24-hour format. For example, 13:00 (for 1.00 p.m). Í to return to the previous menu Press and select Stop Time, and press OK.
Features Timer Child Lock Parental Lock Closed Caption Demo* ï or Î to highlight On and press Press Switch off the TV or put it on standby mode. Note: Once Child Lock is enabled, you cannot access any TV channels with the CH + / - buttons on the TV panel or operate any of its buttons except the POWER button.
Features Timer * * * * Child Lock Confirmed Parental Lock Closed Caption Demo* You can access the Parental Lock menu now. Change Access Code Access the Parental Lock menu as described in Access Parental Lock on the previous page . ï...
Press ï to highlight Clear All and press OK to select. Parental Lock Lock Channel Change Code Cleared Clear All Lock All Movie Rating TV Rating Block Options Press OK to select Yes. Note: A message is displayed to inform you that the channel is blocked when you try to access it.
Page 38
• : Material not suitable for children under 17 years of age. Requires parental guidance. • NC-17 : Not suitable for children under 17 years of age. Has excessive violence, sex or offensive language. • : Not suitable for children under 17 years of age.
Channel 5 Blocked By TV - 14 Access Code : ---- Unblock programs Access Parental Lock menu as described in Access Parental Lock on page 35 . ï to select Block Options and Press press OK to select. ï or Î to highlight Off and press Press Block Options Unrated...
CC2 or CC Mute, and press OK to select. Press Í to return to the previous menu or press ANALOG MENU to exit. Closed Caption choices: • CC Off : Turn off closed captioning. • : Most channels transmit closed captions in CC1 mode.
Turn on Ambilight SOURCE and Î or ï to select Press TV from the source list. Press ANALOG MENU to display the on-screen menu. Select Ambilight > On. Ambilight Ambilight Brightness Mode Balance Press Í to return to the previous menu or press ANALOG MENU to exit.
Select Ambilight color Turn on Ambilight as described in Turn on Ambilight on the previous page . ï until Mode is highlighted and Press press OK to select. Press ï until Color is highlighted and press OK to select. Press ï...
Use your TV as a computer monitor Connect the TV to a computer via the VGA port to use your TV as a computer monitor. Note: Refer to the Quick Start Guide for connecting the computer to your TV. Connect your computer to the TV via the VGA cable (not supplied).
Use your TV in High Definition mode High Definition (HD) mode lets you enjoy clearer and sharper pictures using HD equipment. 10.1 Connect the HD equipment Connect the HDMI or DVI output from your HD equipment to the HDMI 1, HDMI 2 or Side HDMI socket of the Use a DVI-to-HDMI cable if DVI output is connected.
480i 576i format Note: Your Philips TV is HDMI compliant. If you do not get a good picture, it is not a defect of your TV set. Please change the video format on your device (DVD player, cable set top box, etc) to a standard format.
Troubleshooting Note: Before calling Customer Service, refer to the troubleshooting topic below which may help address and resolve your problem. Symptoms Possible cause No power or The TV is not indicator light. connected to the power. Error message on High-Bandwidth the screen with Digital Content HDMI connection.
Page 47
1. Confirm that the connected devices are EasyLink compliant and are connected to your TV via an HDMI cable. Not all brands of devices such as DVD players use the same system as Philips EasyLink. Other brands might not work with Philips EasyLink. EN-47...
Specifications Model no. Type Aspect Ratio Advance Picture Ambilight Mono/Stereo/BBE Power output (RMS Watts) Video modes PC input CVI In with Audio L/R CVBS In with audio L/R, S-Video HDMI Digital audio out Headphone Operating power consumption Standby power [Watt] Accessories Set weight (kg) Set weight with stand (kg)
Connect devices 13.1 Connection overview HDMI 1 SPDIF OUT AUDIO IN PBS SX SERV. C TV ANTENNA CVI-1 Antenna input CVI-1 : Component video input. Y Pb Pr and Audio L/R connectors for DVD, digital receiver or game console, etc. CVI-2 : Second component video input.
Page 50
Audio L/R input at the AUDIO IN connectors on the TV. e: Philips HDMI supports HDCP (High-bandwidth Digital Contents Protec- tion). HDCP is a form of Digital Rights Management that protects high defi nition content in DVD or Blu-ray Discs.
Page 51
Composite - Basic quality Composite video provides basic analogue connectivity, usually combining a (yellow) video cinch cable with (red and white) Audio L/R cinch cable. Match the cable colors when connecting to the composite Video and Audio L/R input connectors on the side of the TV.