Install Channels; Automatically Install Channels; Manually Install Channels - Philips FLAT TV 52PFL7803D User Manual

6.

Install channels

6.1 Automatically install
channels
1. Press SOURCE and Î or ï to select
TV from the source list.
2. Press ANALOG MENU to display the
on-screen menu.
3. Select Install > Auto Program and
press OK.
Auto Program
Program
TV
Auto Program starts scanning for
channels automatically. When scanning
is complete, the first installed channel is
displayed.
Í to return to the previous menu
4. Press
or press ANALOG MENU to exit.
Tip : To cancel or interrupt auto search-
E
ing, press ANALOG MENU. Only chan-
nels found before interruption are stored.
6.2

Manually install channels

Manually set the TV tuner and system and
fine tune the channels.
Change the Tuner Mode
Manually set the tuner system if you have
problems using Auto Program to search
for channels.
1. Press SOURCE and Î or ï to select
TV from the source list.
2. Press ANALOG MENU to display the
3
196 MHz
on-screen menu.
3. Select Install > Tuner Mode and press
OK.
4. Press ï or Î to select Auto, Antenna
or Cable, and press OK to select.
Install
Tuner Mode
Auto Program
Manual
Name
Fav. Program
Í to return to the previous menu
5. Press
or press ANALOG MENU to exit.
Tuner Modes
• Auto : Automatically detects if the cable
signal input is present.
• Antenna : Detects antenna signals and
searches for all antenna TV channels
available in your local area.
• Cable : Detects cable signals and
searches for all cable TV channels
available in your local area.
Change the TV System
SOURCE and Î or ï to select
1. Press
TV from the source list.
2. Press ANALOG MENU to display the
on-screen menu.
3. Select Install > Manual > System, and
press OK.
4. Press ï or Î to select Auto, NTSC,
PAL-M or PAL-N, and press OK to
select.
Auto
Antenna
Cable
EN-25