Position The Tv; Install The Remote Control Batteries; Use The Source List - Philips FLAT TV 52PFL7803D User Manual

If necessary, refer to the Quick Start Guide for
stand mounting instructions.
2.4

Position the TV

Consider the following before positioning
your TV:
• The ideal viewing distance for watching
TV is three times its screen size.
• Position the TV where light does not fall
directly on the screen.
• Connect your devices before you
position your TV.
• Your TV is equipped with a Kensington
Security Slot at the back of the TV.
If connecting an anti-theft Kensington
lock (not supplied), position the TV
within reach of a permanent object (such
as a table) that can be easily attached to
the lock.
• For the best Ambilight effect, position the
TV 10cm (four inches) to 20cm (eight
inches) away from the wall. Ambilight also
works best in a room with dim lighting.
EN-8
2.5 Install the remote control
batteries
1. Slide the battery cover off the back of
the remote control.
2. Insert the two supplied batteries. Be sure
the + and - ends of the batteries line up
with the markings inside the case.
3. Slide the cover back into position.
Note: Remove the batteries if not using
D
the remote control for an extended
period of time.
2.6

Use the Source List

The source list lets you select the audio and
video source that your device is connected
to.
1. Press SOURCE to display the audio and
video source list.
2. Press ï or Î to highlight your AV
source and press OK to select.
Source List Source List
TV
AV
SIDE AV
CVI 1
CVI 2
VGA
HDMI 1
HDMI 2
Source List:
• TV : Normal TV broadcast via the
75-ohm antenna connector.
• AV : Composite video and audio output.