Specifications; Dimensions - Audio Technica ATW-R6200 S User Manual

Uhf synthesized diversity receiver
Hide thumbs Also See for ATW-R6200 S:
Table of Contents

Advertisement

Receiving system
Operating frequency
Simultaneous channels
RF sensitivity
Total harmonic distortion : <1% (63 dB μ V input, 1 kHz, frequency deviation ±10 kHz)
SN ratio
Audio output level
Antenna input jack
Audio output terminal
Headphone OUTPUT jack : 6.3 mm (1/4") standard stereo jack; max power output: 100 mW + 100 mW into 32 ohms
Power
Operating temperature
range
Power consumption
External dimensions
(excluding protrusions)
Weight
● Accessories 1/2λ whip antenna x 2, Power cable, Legs x 4 (4 mounting screws), Front mount antenna cables
and connectors
● This product is for use in the USA only.
● Specifications are subject to change without prior notice.

Specifications

: True diversity
: 946.125 to 949.875 MHz
: Total of 31 channels (125kHz intervals)
: 20 dB μV (at 60dB S/N ratio)
: 110 dB or more
: XLR balanced ≥+18 dBV (LINE), ≥+4 dBV (MIC) (frequency deviation ±15 kHz)
: Φ 6.3 balanced ≥+18 dBV (LINE), ≥+4 dBV (MIC) (frequency deviation ±15 kHz)
: BNC type (50 ohm) 12 V DC OUT (max 60 mA x 2)
: XLR 3-pin male (balanced)
6.3 mm (1/4") standard stereo jack (balanced)
: 120 V AC 60 Hz
: 5℃ to 45 ℃ (41°F to 113 °F)
: 25 W
: 482 mm (18.97") × 43 mm (1.69") × 361 mm (14.21") (W × H × D)
: 4.7 kg (10.4 lbs)

Dimensions

400
482
(Unit: mm)
23

Advertisement

Table of Contents
loading

Table of Contents