Operational Overview; Controls - Furuno GP-25 Operator's Manual

1.

OPERATIONAL OVERVIEW

1.1

Controls

The GP-25 and GP-27 are operated by the touch control.
The chart plotter is mainly operated with
• [Home] menus, where you select options
• [Menu]
• Pop-up menus, where you select options
When you operate a key, a single beep sounds to tell you correct operation. For wrong
operation, two beeps sound. If you do not need the key beep, you can deactivate it
from [Home].
Pictured: GP-25
Control
Power key
[Center] key
[Point] key
[Menu] key
[Home] key
SD card slot: Card drive for SD card (chart card and memory card).
Mini USB connector: For maintenance and servicing.
Force Shutdown button: Forcibly shuts off the power. Should the screen freeze press
this button to turn the power off.
Press to adjust LCD brilliance.
Long-press to turn the power on or off.
Tap to move the own ship to the center of the screen.
Tap to put a point.
Long tap to put an MOB (ManOverBoard) mark at the own ship posi-
tion.
Tap to show [Menu].
Tap to show [Home].
Power key
[Home] key
[Menu] key
[Point] key
[Center] key
Cover:
- SD card slot
- Mini USB connector
- Force Shutdown button
Description
1-1